gparted-live-0.18.0-2-AMD64.iso Works not like what I mentioned above.
Ok, it does pick up the raid. I had to hit Ignore for the move gpt thing tho end of hdd. I don't know what this thing is about. It makes me kinda upset gotta repeatedly hit ignore every new scan several times.
But it still throws the title of OP error on bootup, several times.
Also this is a live media, so may you move this thread in the proper section, it was my fault not reading closely.
Motherboard: ASRock Z75 Pro3
INTEL RAID ARRAY VOLUME0
Intel raid1 from the Z75 chipset @ 250GB
HDD0: Drive Model: Hitachi HTS545025B9A300 5400 RPM Drive Capacity: 238,475 MBytes (250 GB)
HDD1: Drive Model: TOSHIBA MQ01ABD075 5400 RPM Drive Capacity: 715,404 MBytes (750 GB)
Raid card is in a PCIe 2.0 x16 slot @ full x16, not 8,4 or 2 but runs at the full x16 bandwidth.
MARVELL Raid VD HYPERDUO VOLUME1
Vantec UGT-ST644R with HyperDuo, Marvell 88SE9230 SATA 6Gb/s Controller
HDD0: Maxtor 158gig
SSD0: vertex 55.5
Hyperduoe puts it at roughly around 213 GB.
If anything else is needed I'll supply it.