Topic: Record 0 has no FILE magic (0x44414142) Failed to load $MFT: Input/out
I have been updating Windows 10 Pro via Windows Update while dual booting and after rebooting to finish updates, the system partition got boot-inaccessible and became RAW.
GParted 1.2.0
configuration --enable-libparted-dmraid --enable-online-resize
libparted 3.4
========================================
Device: /dev/sda
Model: ATA SAMSUNG MZ7TE256
Serial: S1BCNSAGB01050
Sector size: 512
Total sectors: 500118192
Heads: 255
Sectors/track: 2
Cylinders: 980623
Partition table: msdos
Partition Type Start End Flags Partition Name File System Label Mount Point
/dev/sda1 Primary 2048 282630143 boot ntfs
/dev/sda2 Primary 282630144 440098815 ext4 /
/dev/sda3 Primary 440098816 500117503 ext4 /mnt/sda3
========================================
Check and repair file system (ntfs) on /dev/sda1 00:00:00 ( ERROR )
calibrate /dev/sda1 00:00:00 ( SUCCESS )
path: /dev/sda1 (partition)
start: 2048
end: 282630143
size: 282628096 (134.77 GiB)
check file system on /dev/sda1 for errors and (if possible) fix them 00:00:00 ( ERROR )
ntfsresize -i -f -v '/dev/sda1' 00:00:00 ( ERROR )
ntfsresize v2021.8.22 (libntfs-3g)
Incomplete multi-sector transfer: magic: 0x44414142 size: 1024 usa_ofs: 48 usa_count: 2 data: 0 usn: 905: Input/output error
Record 0 has no FILE magic (0x44414142)
Failed to load $MFT: Input/output error
ERROR(5): Opening '/dev/sda1' as NTFS failed: Input/output error
NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE!
The usage of the /f parameter is very IMPORTANT! No modification was
and will be made to NTFS by this software until it gets repaired.I tried to fix it using CHKDSK yet it shows me this:
X:\Program Files\easeus\epm\bin>chkdsk C: /F /R /X
The type of the file system is NTFS.
Volume label is Windows 10 Pro.
Fixing critical master file table (MFT) files with MFT mirror.
Stage 1: Examining basic file system structure ...
An unspecified error occurred (6e74667363686b2e 7da).
Failed to transfer logged messages to the event log with status 6.
X:\Program Files\easeus\epm\bin>Backup sector copied using TestDisk but still I can't access the data:
MFT and MFT mirror are bad. Failed to repair them.