GParted 0.14.0
Libparted 2.3
Check and repair file system (xfs) on /dev/sda1 01:49:22 ( ERROR )
calibrate /dev/sda1 00:00:01 ( SUCCESS )
path: /dev/sda1
start: 34
end: 54,609,815,551
size: 54,609,815,518 (25.43 TiB)
check file system on /dev/sda1 for errors and (if possible) fix them 01:49:21 ( SUCCESS )
xfs_repair -v /dev/sda1
Phase 1 - find and verify superblock...
Not enough RAM available for repair to enable prefetching.
This will be _slow_.
You need at least 3840MB RAM to run with prefetching enabled.
- block cache size set to 512 entries
Phase 2 - using internal log
- zero log...
zero_log: head block 10 tail block 10
- scan filesystem freespace and inode maps...
- found root inode chunk
Phase 3 - for each AG...
- scan and clear agi unlinked lists...
- process known inodes and perform inode discovery...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 16
- agno = 17
- agno = 18
- agno = 19
- agno = 20
- agno = 21
- agno = 22
- agno = 23
- process newly discovered inodes...
Phase 4 - check for duplicate blocks...
- setting up duplicate extent list...
- check for inodes claiming duplicate blocks...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 16
- agno = 17
- agno = 18
- agno = 19
- agno = 20
- agno = 21
- agno = 22
- agno = 23
Phase 5 - rebuild AG headers and trees...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 16
- agno = 17
- agno = 18
- agno = 19
- agno = 20
- agno = 21
- agno = 22
- agno = 23
- reset superblock...
Phase 6 - check inode connectivity...
- resetting contents of realtime bitmap and summary inodes
- traversing filesystem ...
- agno = 0
- agno = 1
- agno = 2
- agno = 3
- agno = 4
- agno = 5
- agno = 6
- agno = 7
- agno = 8
- agno = 9
- agno = 10
- agno = 11
- agno = 12
- agno = 13
- agno = 14
- agno = 15
- agno = 16
- agno = 17
- agno = 18
- agno = 19
- agno = 20
- agno = 21
- agno = 22
- agno = 23
- traversal finished ...
- moving disconnected inodes to lost+found ...
Phase 7 - verify and correct link counts...
XFS_REPAIR Summary Sun Dec 9 21:13:10 2012
Phase Start End Duration
Phase 1: 12/09 19:23:50 12/09 19:23:51 1 second
Phase 2: 12/09 19:23:51 12/09 19:24:05 14 seconds
Phase 3: 12/09 19:24:05 12/09 20:17:53 53 minutes, 48 seconds
Phase 4: 12/09 20:17:53 12/09 21:12:30 54 minutes, 37 seconds
Phase 5: 12/09 21:12:30 12/09 21:12:35 5 seconds
Phase 6: 12/09 21:12:35 12/09 21:13:10 35 seconds
Phase 7: 12/09 21:13:10 12/09 21:13:10
Total run time: 1 hour, 49 minutes, 20 seconds
done
grow file system to fill the partition 00:00:00 ( ERROR )
mkdir -v /tmp/gparted-mM5JE4 00:00:00 ( SUCCESS )
Created directory /tmp/gparted-mM5JE4
mount -v -t xfs /dev/sda1 /tmp/gparted-mM5JE4 00:00:00 ( ERROR )
mount: File too large
rmdir -v /tmp/gparted-mM5JE4 00:00:00 ( SUCCESS )
Removed directory /tmp/gparted-mM5JE4
libparted messages ( INFO )
The backup GPT table is corrupt, but the primary appears OK, so that will be used.