Topic: Partition Error
I have used an old version 0.5.2 of GParted to reduce the size of an NTFS partition. I have now hit the known bug that this version of GParted incorrectly modifies the MBR/PBR. I have read the post on this and here is the output from the fdisk and parted commands. Any help will be gratefully received.
A bit late but I have updated to the latest version now.
root@sysresccd /mnt/gentoo % parted /dev/sda unit s print
Model: ATA ST9640320AS (scsi)
Disk /dev/sda: 1250263728s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 63s 80324s 80262s primary fat16
2 80325s 36944324s 36864000s primary ntfs boot
3 36944325s 243208034s 206263710s primary ntfs
root@sysresccd /mnt/gentoo % fdisk -l -u
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x103d7974
Device Boot Start End Blocks Id System
/dev/sda1 63 80324 40131 de Dell Utility
/dev/sda2 * 80325 36944324 18432000 7 HPFS/NTFS
/dev/sda3 36944325 243208034 103131855 7 HPFS/NTFS
Disk /dev/sdb: 4043 MB, 4043309056 bytes
255 heads, 63 sectors/track, 491 cylinders, total 7897088 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x2c6b7369
Device Boot Start End Blocks Id System
/dev/sdb1 63 7887914 3943926 b W95 FAT32